72" Hydraulic Skid Steer Snow Blower, 16–24 GPM, Hydraulic Chute Rotator & Deflector, 24" Impeller, SSB72H

MechMaxx SSB Series skid steer snow blowers are designed for clearing driveways, parking lots, farm lanes, commercial properties, and other large areas. Available in 72 in and 84 in cutting widths, both models feature a 27 in intake height and a two-stage snow-clearing system. The 17.5 in serrated auger cuts into and gathers accumulated snow, then feeds it into a 24 in four-paddle, open-center impeller for discharge through the chute.
The auger, impeller, chute rotation, and deflector are powered by the skid steer’s auxiliary hydraulic system. A universal skid steer quick-attach mount connects to properly equipped machines, while the included 12 V wired controller lets the operator rotate the chute, adjust the deflector, and operate the LED work light from the cab

• Two working widths: Choose a 72 in or 84 in cutting width. Both models have a 27 in intake height for clearing driveways, parking lots, farm lanes, and other large areas.
• Two-stage snow clearing: A 17.5 in serrated auger gathers and feeds snow into the 24 in four-paddle, open-center impeller for discharge through the chute.
• Hydraulic operation: Designed for skid steers with 16–24 GPM auxiliary hydraulic flow and a maximum operating pressure of 3,000 psi.
• In-cab discharge control: Use the included wired controller to rotate the hydraulic chute up to 180° and adjust the hydraulic deflector angle without leaving the cab.
• Universal skid steer connection: The universal quick-attach mount provides fast connection to compatible skid steers and compact track loaders.
• Serviceable, operator-friendly design: Standard equipment includes a replaceable hardened bolt-on cutting edge, a snow shovel, an LED work light, a parking stand, skid shoes and textured cab access steps.

Note!

• Before use, grease all grease fittings and lubricate the drive chain with bar and chain oil.
  
• Fill the gearbox with approximately 1.22 qt (1.15 L) of SAE 85W-90 gear oil before operation.
  
• Before purchasing, confirm that your skid steer's auxiliary hydraulic couplers are located on the left boom, as viewed from the operator's seat. The supplied hydraulic hoses are designed for left-side connections and will not reach couplers located on the right boom.
  
• This snow blower does not use the skid steer's machine-specific attachment-control connector. The wired controller requires a direct connection to the skid steer's 12 V battery using the supplied fused power cable.