Max. Digging Depth |
8 ft |
Digging Depth (two foot flat bottom) |
7 ft 6 in |
Swing Arc |
180 Degrees |
Loading Height (bucket at 60 °) |
6 ft |
Reach from Center Line of Swing Pivot |
9 ft 9 in |
Transport Height (maximum) |
5 ft 7 in |
Bucket Rotation |
180 Degrees |
Loading Reach (bucket at 60 °) |
3 ft 7 in |
Transport Overhang |
4 ft 3 in |
Undercut |
2 ft 3 in |
Stabilizer Spread (down position) |
6 ft 7 in |
Stabilizer Spread (up position) |
5 ft 9 in |
Stabilizer Spread (lifting height) |
3 ft 8 in |
Transportation Height (maximum altitude) |
8 ft 4 in |
Loading Height (bucket at 180 °) |
9 ft 7 in |
Transport Overhang (maximum) |
4 ft 5 in |
Bucket Cylinder Digging Force |
2840 lbs |
Dipper stick Cylinder Digging Force |
2005 lbs |
Thumb |
Hydraulic |
Hydraulic Volume Requirements |
5 to 6 GPM |
Hydraulic Pressure Requirements |
2250psi |
Minimun Horsepower |
20 HP |
Bucket Size |
15 in (4 teeth) |
3-Point Hitch |
CAT I & II |
Hydraulic Tank Capacity |
4.1 US Gal (15.5L) |
Hydraulic Type Recommended |
AW 46 |
Packing Size (LxWxH) |
56 x 30 x 80 in |
Weight (N.W/G.W.) |
1160/1259 lbs |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.