Pre-Season Checklist for Your Snow Blower

Imagine this: the first snowfall happens, and your snow blower won’t start up. A complete nightmare. Doing some prep now means you’ll be ready for when the forecast springs an unwelcome blizzard on you. 


Here’s a quick checklist to get your equipment ready before the winter truly hits.


1. Inspect the Auger and Impeller


Look over the auger and impeller for bent, cracked, or worn parts. Spin them by hand (with the machine off and disconnected from the tractor) to make sure they turn freely, and nothing is rubbing or jammed. Rust and debris can build up during the off-season, so do a good scan before you start it up.


2. Check the Shear Pins


Shear pins are designed to break if the auger hits something hard, like a rock or a large chunk of ice, protecting your gearbox from unwanted damage. Make sure the ones installed are in good shape, and keep a handful of spares on hand. Only use the correct replacement pins, since a stronger bolt can defeat the whole purpose.


3. Grease Up


Grease all fittings and the PTO driveline according to your owner’s manual. Check the gearbox oil level and top it off if needed. Cold weather is harsh on dry, neglected parts, so giving it a good grease goes a long way.


4. Test the Chute


Rotate the chute through its full range and make sure the deflector adjusts smoothly. If it’s hard to turn, clean and lubricate it. A stuck chute in the middle of a storm means blowing snow in the wrong direction (or right at your own house).


Some chutes have a 360° rotation, like this one from MechMaxx, which really helps control where the snow builds up.

Close up of a MechMaxx snowblower chute on a red background

5. Do a Test Run


Hook up the snow blower to your tractor and run it for a few minutes. Listen for unusual noises, watch for leaks, and make sure everything engages the way it should. It’s much easier to fix a problem in a dry, warm driveway than in a cold blizzard.


6. Walk Your Property


Before the snow falls, mark out your property. Put away any flags, garden gnomes, and get rid of rocks that could damage your snow blower during clearing. You can mark where your lawn starts with painted wood stakes so you don’t tear up grass or your wife’s flower bed. 


Ready to Clear?


Spending an hour or two on this checklist now can save you from breakdowns, repair bills, and frustration when the snow starts to pile up. Get ahead of the season, and winter mornings will be a lot easier.


Need a replacement part or an upgrade? Explore MechMaxx’s lineup at MechMaxx.com and get ready for the first snowfall.

Next article Previous article

Customer Reviews (0 reviews)